Bissell 1694 User Manual POWER STEAMER Manuals And Guides L0903190
User Manual: Bissell 1694 1694 BISSELL POWER STEAMER - Manuals and Guides View the owners manual for your BISSELL POWER STEAMER #1694. Home:Vacuums & Floor Care Parts:Bissell Parts:Bissell POWER STEAMER Manual
Open the PDF directly: View PDF .
Page Count: 12
USER'S GUIDE
1694 SERIES
8806 SERIES
SafetyInstructions
9 Maintenance and Care
you for buying a BISSELL deepcleaner
We're glad you purchased a BISSELL deep cleaner. Everything we know
about floor care went into the design and construction of this complete,
high-tech home cleaning system.
Your BISSELL deep cleaner is well made, and we back it with a
limited one year warranty. We also stand behind it with a knowledgeable,
dedicated Consumer Services department, so, should you ever have a
problem, you'll receive fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is
a global leader in the design, manufacture, and service of high quality
homecare products like your BISSELL deep cleaner.
Thanks again, from all of us at BISSELL.
Mark J. Bissell
President and Chief Executive Officer
2 www.bissell.com 800.237.7691
ug120-4007 1694-8806 507.indd 2 6/4/07 2:47:31 PM
IMPORTANT SAFETY INSTRUCTIONS
When usbg an eleckical appliance, basic precautions
should be observed, induding the following:
Read all instructions before using your PowerSteamer®/
PowerLifter
/k WARNING: To reduce tile risk
of fire,electric shock, or injury:
• Do not immerse.
• Use only on surfaces moistened by cleaning process.
• Always connect to a properly grounded outlet.
• See Grounding Instructions.
• Unplug from outlet when not in use and before
conducting maintenance or troubleshooting.
• Do not leave machine when it is plugged in.
• Donot service machine whenit isplugged in.
• Do not use with damaged cord or plug.
• If applianceis not working as it should, has been
dropped, damaged, left outdoors, or dropped into
water,have it repaired at an authorized Service Center.
• Use indoors only.
• Donot pullor carry by cord, usecordas a handle, close
door on cord, pullcord around sharp comers or edges, run
appliance over cord, or expose cord to heated surfaces.
• Unplug by grasping the plug, not the cord.
• Donot handle plug or appliance wih wet hands.
• Donot put any object into appliance openings, use with
blocked opening, or restrict air flow.
• Do not expose hair, loose clothing, fingers or body
parts to openings or moving parts.
• Do not pick up hot or burning objects.
• Do not pick up flammable or combustible materials
(lighter fluid, gasoline, kerosene, etc.) or use in the
presence of explosive liquids or vapor.
• Donot useappliance in an enclosed space filled w_ vapors
given off by dl base paint, paint lhinner, some molhproofing
substances, flammable dust, oroher explesive ortoxic vapors.
• Donot pick up toxic material (chlorine bleach,
ammonia, drain cleaner, gasoline, etc.).
• Do not modify the 3-prong grounded plug.
• Do not allow to be used as a toy.
• Do not use for any purpose other than described in
this User's Guide.
• Donot operate theappliance unless the beltdooris
securely assembled in the Iooa'don provided.
• Do not unplug by pulling on the cord.
• Use only manufacturer's recommended attachments.
• Use only cleaningproducts formulated by BISSELL for
use in this appliance to prevent internal component
damage. See the cleaning fluid sectionof this guide.
• Keep openings free of dust, lint, hair, etc.
• Do not point attachment nozzleat people or animals
• Keep appliance on a level surface.
www.bissell.com
• Turn off all controls before unplugging.
• Be extra careful when cleaning stairs.
• Close attention is necessarywhen used by or
near children.
• WARNING: The power cord on this product contains
lead, a chemical known to the State of California to
cause birth defects or other reproductive harm.
WASH HANDSAFTER HANDLING.
SAVE THESE
INSTRUCTIONS.
THIS MODEL IS FOR HOUSEHOLD USE ONLY.
Commercial use of this unit voids the
manufacturer's warranty.
GROUNDING INSTRUCTIONS
This appliance must be connected to a grounded
wiring system. If it should malfunction or break
down, grounding provides a safe path of least
resistance for electrical current,reducing the risk of
electrical shock. The cord for this appliance has an
equipment-grounding conductorand a grounding
plug. It must only be plugged intoan outlet that is
properly installed and grounded in accordance with
all local codesand ordinances.
/k WARNING: Improper
connection of the equipment-grounding
conductor can result in a riskof electrical
shock. Check with a qualified electrician
or service person if you aren't sure if the
outlet is properly grounded. DO NOT MODIFY
THE PLUG. If it will not fit the outlet, have a
proper outlet installed by a qualified electri-
cian. This appliance is designed foruse on a
nominal 120-volt circuit, and has a ground-
ing attachment plug that looks likethe plug
inthe drawing above. Make certain that the
appliance is connected to an outlet having
the same configuration as the plug. Noplug
adapter should be used with this appliance.
800 237 7691 3
ug120-4007 1694-8806 507.indd 3 6/4/07 2:47:32 PM
bduct view Keep plenty of genuine BISSELL
advanced cleaning formulas on hand
so you can cleanwhenever it fits your
schedule. Alwaysuse genuine BISSELL
deepcleaning formulas. Non-BISSELL
cleaning solutions may harmthe
machine andwill void the warranty.
Cord Wrap TM
Power Cord --
Strain Reliever
EasyRolling
BISSELL Formulas:
BeltAccess
FloorNozzle Dirtlifter @
Window PowerBrush
48 oz, BISSELL 48 oz. BISSELL
Fiber Cleansing Multi Allergen
Formula TM with Removal TM
Scotchgard TM Formula TM with
Protector Scotchgard TM
4 www.bissell.com
48 oz. BISSELL 48 oz, BISSELL 48 oz. BISSELL 43 oz. BISSELL 32 oz, 22 oz,
Pet Odorand Natural O_ange Lavender E,ss@ce 3X Concentrated BISSELL BISSELL
Sdl Remova< _ Extract Formula Formula with Fiber Cleansing Hard Floor Tough Stain
Formula with w_h Sc/atchgard TM Scotchgard TM Formula with Solutions TM Pre Cbane/T_
Scotchgard TM Protector Protector ScotchgarU _ Formula
Protector Protector
800.237.7691
ug120-4007 1694-8806 507.indd 4 6/4/07 2:47:33 PM
How to use this guide
This user'sguide has beendesigned to help
you get the maximumsatisfaction from your
BISSELL deep cleaner. You'll find assembly
and operating instructions, safetyprecautions,
as well as maintenance and troubleshooting
instructions. Pleasereadthis user's guide thor-
oughlybefore assembling your deep cleaner.
Payparticular attention to theproduct diagram,
assembly instructions, andpart names. Locate and
organize all parts before assembly. Familiarize your-
self with theparts andwhere they go.Following
this user's guide will greatly enhance your ability to
getthe most performance from your deep cleaner
for many years.
Your deepcleaner comesin two
easyto assemble components.
Handle Assembly
Lower Body
The only tool you will need to assemble your
cleaner is a Phillips head (_ screwdriver.
Do not plug in your cleaner
until you have completely
assembled it per the
following instructions
and are familiar with all
instructions and operating
procedures.
Slide the handleassembly (with attached
Quick ReleaseCord Wrap TM) down into the
lower body until it will go no further.
Secure_the handleby placing one (1) Phillips
head _ screw (supplied)through the screw
opening in the lower body and into the rear
of the handleassembly. Tighten with
screwdriver until secure.
Assembly is nowcomplete.
_cial features of your BISSELL deep cleaner
YourBISSELL deep cleaneris a home cleaning
system that uses a combination of hot tap water,
BISSELL advanced cleaning formula, brush
agitation and suction to safely clean carpets.
DirtLifter ® PowerBrush
The DirtLifter PowerBrush is designed to enhance
cleaning performance. The bristle
patternsafely lifts out the deep downdirt while
gently grooming carpetfibers. The floating
suspension self-adjusts to all carpetheights.
When the power is ON ( I ) and the machine is
in the upright position, your carpetis protected
because the brushes are liftedup off the carpet.
www.bissell,com
Toreduce the dsk of fire, use only
BISSELL advanced deep cleaning
formula for full size machines inyour
deep cleaner. Use of cleaning
formulas that contain leman or
pine oil may damage this appliance
and void the warranty. Chemical
spot cleaners orsolvent-based soil
removers should not he used. These
products mayreact with the plas'dc
materials used in your deep cleaner
causing cracking orpit'dng.
800.237.7691
ug120-4007 1694-8806 507.indd 5 6/4/07 2:47:40 PN
features of your BISSELL deep cleaner
Measuring cup
Your deepcleaner is equipped with a measuring
cup for adding the proper amount of cleaning
formula to the 2-in-1 tank. Forconvenience, the
measuring cup stores on the back of the unit.
2-in-1 water tank
Our 2-in-1 water tank system is designed with a
heavy dtdy bladder inside for clean water. As you
clean, the clean water in the bladder will empty
and mix withthe cleaning formula. Dirty water
pulled out of your carpets will collect around the
outside of the bladder so that clean anddirty
waterare alwayskept separate. This allows the
user to maximize tank space, yet only carry one
tank to and from the sink for emptying andfilling.
Planactivities to give your carpet time to dry.
Move furniture to anotherarea if cleaning an
entire room (optional).
Thoroughly vacuum area with a dry vacuum
cleaner before deep cleaning.
Plan your cleaning route to leaveanexit pan. It
is bestto begin cleaning in the corner farthest
fromyour exit.
Pretreating(optional)
Note: Pretreating is recommended to improve
cleaning effectiveness for heavily soiled carpet in
high traffic areas such as entryways and hallways.
A. Spraythe BISSELLTouoh Stain Pre-freat
formula onto heavy framc areas, soiled
areas, or stains.
B. Allowto penetrate for at least3 minutes.
C. Following the instructions below, clean
as normal, usingthe machine on the
hightraffic setting.
Fill the 2-in-1 water tank
1. Release the handle and lay the machine
handle back to access the tank.
2. Remove the tank from the base of the
machine by lifting the tank carry handle.
6 www hiss611 oo_
Some Berbercarpets have a
tendency to fuzz with wear.
Repeated strokes in the same
area with an ordinary vacuum or
deepcleaner may aggravate this
800.237.7691
ug120-4007 1694-8806 507.indd 6 6/4/07 2:47:41 PN
the 2-in-1 water tank (continued)
Carry likea bucket to the sink. Rotate the
handle forward to unlatch the lid. Lift off and set
the lid aside.
4. Using the measuring cup, pourBISSELL deep
cleaning formual into me mouthof me bladder.
4a. If using the BISSELL 3x Concentrated Fiber
Cleansing Formula: add 3 capfuls of 3x
Concentrated Fiber Cleansing Formulainto
the mouth of the bladder.
5. Fill up the bladder with clean hot tap water.
*Do not boil or microwave water as it
can destroy the bladder.
6. Replace the top of the tank by matching
the lid and tank edges.Handlemust be in
the forward position in order to replace lid,
Rotate the handleto the carrying position to
latch the lid.
Note: Remember to secure the lid and test to make
sure itis secure before picking up the tank.
7. Place tank into machine base, seating firmly
in place. Rotate tank handle back into latched
position. Bring machine handlebackinto
upright position.
Power switch
Plug the deep cleaner into a proper outlet and
turn the power switch ON. The switchis found
on the side of the unit.
Cleaning strokes
1, While pressingthe spray releasetrigger,
make one slow forward and backwardwet
pass.Let the BISSELL advanced deep
cleaningformula and DirtLifter Power Brush
do the work for you.
Caution: Do not overwet.
Release the trigger and make one slow
forward and back pass over the same area
to remove any residualdirty water.
Repeatcleaning passeswithout pressing
the trigger until you can't see any more
water being suctioned up.
Whencleaning job is complete, refer to the
Maintenance care section on page9 for
machinecleanup and storage instructions.
To reduce the risk of fire
and electric Shockdue to
internal component
damage, use only BISSELL
cleaning fluids intended for
use with the deep cleaner.
Non-BISSELL cleaning
solutions may harm the
machine and void
the warranty.
ww,bissell,com 800,237,7691 7
ug120-4007 1694-8806 507.indd 7 6/4/07 2:47:41 PM
Empty the 2-in-1 water tank
Remove the 2-in-1 water tankfrom the base
using the tank carry handle. Carry the tank like
a bucket to a utility sinkor outside where you
will dispose ofthe collec'don water. Remove me
top of me tank by rotating me handle forward to
unlatch lid and lifting lid off tank.
2. Empty collection water from bottom of tank.
NOTE: You may notice hair & debris deposits
onthecarpetor in thetank that were
loosened by the cleaning action (especially
with newercarpets that have neverbeen
deep cleaned before). This debris should be
picked up and thrown away.
After each use, remove and rinse the lint
screen locatedon the tank lid.
4. Refillthe tank in tank by referencing"Fill the
2-in-1 water tank" on page 7. Remember
to secure the top of the tank by rotating the
handle and test to make sure it is secure
before picking up.
5. Return2-in-1 water tank to the machine.
Cleaning fluid
Keep plenty of genuine BISSELL Fiber
Cleansing Formula TM and Scotchgard TM
protector cartridges on hand so you can
clean and protectwheneverit fits your
schedule. Always use genuine BISSELL
deep cleaning formulas.
JA WARNING:
Toreduce the riskof fire and
electric shockdueto internal
component damage, use only
BISSELL cleaning fluids intended
for use with the deepcleaner.
Non-BISSELL cleaning solutions
may harmthe machine andvoid
the warranty.
48 oz, BISSELL 48 oz, BISSELL 48 oz. BISSELL 48 oz, BISSELL 43 oz.BISSELL 3X
Fiber Cleansing Formula TM Multi Allergen Removal TM Pet Odor and Soil Removal TM Natural Orange Conce_Ttrated Rber
%thSc/stchgard TM Formula with Scotchgard TM Formula with Scotchgard TM Extract Formula with Cleansng Formula %th
Piotector Protector Protector Scotchgard TM Protector ScotdTgard TM Protector
item # 0710 item # 0720 item # 0730 item # 0740 item # 0716
800.237.7691
ug120-4007 1694-8806 507.indd 8 6/4/07 2:47:42 PM
Maintenance and care
Machinecare
Forbest results, a few simple steps canassure
your machine is well maintained after your
cleaning is complete.
1. Turn powerswitch OFF( 0 ). Unplug the
machine and wrap the power cord.
Afteremptying the 2-in-1 water tank, rinse it out
at a faucet with running hottap water, taking
care to cleanunderneath me heavy duty bladder,
and all around it. Clean out lint'_ap.
Replace the 2-in-1 water tank on the machine.
Any loose hair or debris can be pulled from
the brush roll if desired and thrown away.
5. Wipe the machine's exterior with a soft cloth.
6. After carpet is dry, vacuumagain to remove
hair and fuzz.
Machinestorage
Once your cleaning is complete, make sure the
2-in-1 water tank is emptied and rinsed out. Put
theunit away ina doset orbasement for thenextuse.
Note: Store cleaner in a protected, dry area.
Since this product uses water,it must not be
stored wherethere is a danger of freezing.
Freezing will damage internal components
andvoid the warranty.
To reduce the risk of fire,
electric shock or injury,
unplug from the outlet
before servicing.
Reduced Spray OR No Spray.
Possible cause
1. Bladder may beempty
2. The lint screenmay be clogged
3. 2-in-1 tank maynot be seatedproperly.
4. Pump may have lost prime.
1. Turn poweroff; Refill bladder with clean
hot tap water.
2. Clean out lint screen.
3. Turn powerswitch OFF; remove tank and
reseat tanks.
4. Turn powerswitch OFF; after 1 minuteturn
ON and depresssprayrelease trigger.
www.bissell.com 800.237.7691 9
ug120-4007 1694-8806 507.indd 9 6/4/07 2:47:47 Pr
Reduced Spray OR No Spray.
Possible cause
5. The pump belt may be broken.
Ir 1 Screwdriver
DirtLifter PowerBrush Does Not Turn.
Possible cause
1. The brush belt or pump belt is off or broken.
Cleaner Not Picking Up Solution
Possible cause
1. Nozzle window may not be properly attached.
5. Turn powerSwitch OFF (0) and unplug
from the outlet Tocheck if a pump
belt has broken,you will need a flat head
screwdriver. Insert the bladeendinto the
lower slot of the belt access door to release
the lower snap.If necessary, insertthe balde
end into the upperslot to releasethe upper
snap. Examine the belt for breakage. You
should be ableto see the pump belt looped
aroundthe motor shaft. If it is brokenor
missing, please refer to Replacement Parts
on page 11 before calling BISSELL Consumer
Services. Complete installation instructions
will accompanythe replacement belt.
1. Turn the machine OFF (0) and unplug from
the outlet. To check if the brush belt or
pump belt has broken, you will need a flat
head screwdriver. Insert the bladeend into
the lower slot of the belt access doorto
release the lower snap.If necessary, insert
the bladeend into the upper slot to release
the upper snap. Examinethe belt for
breakage. If broken, please refer toReplacement
Parts on page 11 before callingConsumer
Services.Complete installationinstructions
will accompany the replacement belt.
2. 2-in-1 tank lid is not installed.
3. 2-in-1 tank is not properly seated.
4 2-in-1 tank has pickedup maximum dirty water
1. Makesure the tabs on the floor nozzle
window are inserted through the matingslot
in the mainhousing. Re-install if necessary.
2. Re-install lid; refer to the Operation section.
3. 2-in-1 tank must be firmlyseated to function;
remove and reseat 2-in-1 tank.
4. Empty 2-in-1 tank and refill, refer to the
Operation section.
Other maintenance or service not included in the manual should be performed by an
authorized service representative.
Thank you for selecting a BISSELL product.
I Please do not return this product to the store I
For any ques_ons or concerns, BISSELL is happy to be of service.
Contact us directly at 1-800-237-7691.
10 www.bissell.com 800.237.7691
ug120-4007 1694-8806 507.indd 10 6/4/07 2:47:48 PM
BISSELL Consumer Services
For information about repairs or replacement parts, or questions about your warranty, call:
BISSELL Consumer Services
1-800-237-7691
Monday - Friday 8 a.m. 10 p.m. EST
Saturday 9 a.m. 8 p.m. EST
BISSELL HOMECARE, INC
PO Box 3606
Grand RapidsMI 49501
A_N: Consumer Services
Or visitthe BISSELL website- www,bissell,com
When contactingBISSELL, have model number of unit available.
Please record your Model Number:
Please record your Purchase Date:
NOTE: Please keep your original salesreceipt. It provides proof of date of purchase in the event
of a warrantyclaim.SeeWarranty on page 12 for details.
dacement parts
Item Part No.
*Not all parts are
Tank Assembly Complete
Tank Lid Assembly
Tank Bottom
Baffle with Red Float
Window Gasket
Replacement PumpBelt (with instructions)
Replacement BrushBelt (with instructions)
Lint Screen
Measuring Cup
48 oz. BISSELL Fiber Cleansing Formula
with Scotchgard TM Protector
22 oz. BISSELL Tough Stain PreCleaner
3x Concentrated Fiber Cleansing
Formula with Scotchgard TM
Protector 43 oz.
included with every model.
www.bissell.com 800.237.7691 11
ug120-4007 1694-8806 507.indd 11 6/4/07 2:47:48 PM
irranty - BISSELL PowerSteamer/PowerLifter
This warranty gives you specific legal rights, and you may also have other rigms wnlcn may vary from state to
state. If you need additional instruction regarding this warranty or have auestlons regaramgwhat Jt may co/er.
please contact BISSELL Consumer Services by E-mail, telephone, or regular mail as described below.
Limited One Year Warranty
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, UDOn receipt of the E roauct BISSELL
Homecare, Inc. will repair or replace (with new or remanufactured components or products), at BISSELL's option,
free of charge from the date of purchase by the original purchaser,for one year any defective or
malfunctioning part.
See information below on "If your BISSELL product should require service".
This warranty appliesto product usedfor personal, and not commercial or rental service. This warrantydoes notapply
to fans or routine maintenance components such as filters, belts, or brushes. Damage or malfunction caused by negli-
gence,abuse,neglect, unauthorized repair, or any other use not in accordance with the User's Guide is not covered.
If your BISSELL product should require service:
Contact BISSELL Consumer Services to locate a BISSELL Authorized Service Center in your area.
If you need information about repairs or replacement parts, or if you have questions about your warranty,
